FLUID Synthetic and mineral based motor oils

CenterFlo CF50

CF50 is a high performance 1” AODD pump with many unique features. Similar to all our CF series pumps, the new CF50 utilizes a flow through fluid design that is more air efficient than traditional AODD pumps. Capable of distributing up to 53 gal/min. This equates to higher performance, versatility along with easy serviceability.

• High performance; increased flow rate with minimal air consumption
• Dependability: non-icing air motor
• Versatile; inlet and outlet ports can be oriented to fit the installation/application
• Ease of service; diaphragms and air motor can be serviced with the pump installed without removal=

Part No.:

1120-038 CF50 Polypropylene

Market Served:

Fleets, Mining and construction, Lube Trucks, Railroad and mass transit, In-plant transfer, Car and truck dealers
 
Product Specifications
3/8” NPSM(F)
1” ANSI flange B16.5 150 lb
1” ANSI flange B16.5 150 lbs
53 gal/min (200 l/min)
22-102 psi (1.5-7 bar)
1/8” (3.2 mm)
PTFE (Teflon®), Polypropylene, Stainless Steel, Hytrel®, FKN, ASTM
Windshield wash solution
Fluid dispensing, transfer, and evacuation
SB 1147

CenterFlo CF50 Aluminum

CF50 is a high performance 1” AODD pump with many unique features. Similar to all our CF series pumps, the new CF50 utilizes a flow through fluid design that is more air efficient than traditional AODD pumps. Capable of distributing up to 53 gal/min. This quates to higher performance, versatility along with easy serviceability.

• High performance; increased flow rate with minimal air consumption
• Dependability: non-icing air motor
• Versatile; inlet and outlet ports can be oriented to fit the installation/application
• Ease of service; diaphragms and air motor can be serviced with the pump installed without removal

Part No.:

1120-037 - CF50 Aluminum

Market Served:

Fleets, Mining and construction, Lube Trucks, Railroad and mass transit, In-plant transfer, Car and truck dealers
 
Product Specifications
3/8” NPSM(F)
1” NPT(F)
1” NPT(F)
53 gal/min (200 l/min)
22-102 psi (1.5-7 bar)
1/8” (3.2 mm)
Aluminum, Hytrel, Acetal, Buna-N™, Stainless Steel
Light viscosity fluids, synthetic, mineral oils, anti-freeze, and used oil
Fluid dispensing, transfer, and evacuation
SB 1147