LION™ 350 – 5:1 Pump
Double-acting, air-operated, medium-pressure, heavy-duty pumps for dispensing lubricants in medium to large-size installations, which may include simultaneous dispense points. Built-in port for the included pressure relief valve.
(Wall mount does include bung adaptor)
- 3 1/4” Air motor – Pneumatically actuated air valve with only three moving parts and no springs. Large effective area for maximum pumping power
- Efficient internal air exhaust – Prevents icing, which can stall pump operation
- Long life packings – Dual packing seals provide trouble-free operation
- Double-acting pump – Provides even and smooth fluid flow
- Double ball pump design – Stub pump used for positive priming and pumping of all grades of oil
- Large port pump inlet ball-check valve – Helps in positive priming and improves pump efficiency
- Includes a pressure relief valve kit(3120-214) – Pressure relief kit relieves system pressure, that can cause damage to lubrication systems
Part No.:
1430-010 - Lion™ 350 5:1, Wall mt stub
1430-012 - Lion™ 350 5:1, 55 gal Drum length
1430-012 - Lion™ 350 5:1, 55 gal Drum length
Markets Served:
Mining and construction, Lube Trucks, Railroad and mass transit vehicle maintenance, Marine, Auto and truck dealerships, Fleet service facilities, Industrial
Technical Data
(1) Maximum air consumption with 72 psi (5 bar) air inlet pressure and 80 cpm.
5:1
30 to 175 psi (2 to 12 bar)
12.4 scfm (350 Nl/min)
875 psi (60 bar)
3.25” (80mm)
3.15” (80 mm)
3.2 gal/min (12 l/min)
8 gal/min (30 l/min)
3/8” NPT (F)
1 1/2” NPT (F)
1/2” NPT (F)
Hard chromed steel, Steel, Polyurethane, NBR, Aluminum
Pump noise level meets OSHA requirements at all recommended operating air pressures
1155
LION™ 450 – 3:1 Pump
Medium pressure pump for oil systems where high volume dispensing using simultaneous dispense points is required. This pump is recommended for medium pumping distances.
Part No.:
1430-001 Lion™ 450 3:1 stub pump
Markets Served:
Heavy duty truck/fleet, Railroad and mass transit vehicle maintenance, In-plant high volume transfer, Marine, Mining vehicle maintenance, Large automotive dealerships
Technical Data
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(2) Maximum noise level measured at 3’ (1 m) from the pump, 100 psi (7 bar) air pressure and free delivery.
(3) Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor.
NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage lubrication system components. Use pressure relief valve kit included with this pump.
Warning! Do not use any Lion™ 450/600 series products with flammable fluids.
Verify fluid compatibility with MSDS sheets.
Contact Balcrank for specific system design performance and technical data.
30 to 180 psi (2 to 12.4 bar)
6
28 CFM (800 Nl/min)
510 psi (36 bar)
4.5” (115 mm)
4” (100 mm)
12 gal/min (45 l/min)
32 gal/min (120 l/min)
1/2” NPT(F)
1 1/2” NPT(F)
3/4” NPT(F)
Steel, Hard Chromed Steel, Zinc Plated Steel, Stainless Steel, Cast Iron, Polyurethane, Buna-N™, Bronze Filled PTFE
80 dB
SB 1134
LION™ 450 – 6:1 Pump
Medium pressure pump for oil systems where high volume dispensing using simultaneous dispense points is required. Medium/high pressure pump is recommended for longer pumping distances.
Part No.:
1430-002 Lion™ 450 6:1 stub pump
Markets Served:
Heavy duty truck/fleet, Railroad and mass transit vehicle maintenance, In-plant high volume transfer, Marine, Mining vehicle maintenance, Large automotive dealerships
Technical Data
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(2) Maximum noise level measured at 3’ (1 m) from the pump, 100 psi (7 bar) air pressure and free delivery.
(3) Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor.
NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage lubrication system components. Use pressure relief valve kit included with this pump.
Warning! Do not use any Lion™ 450/600 series products with flammable fluids.
Verify fluid compatibility with MSDS sheets.
Contact Balcrank for specific system design performance and technical data.
30 to 180 psi (2 to 12.4 bar)
11
29 CFM (830 Nl/min)
1,020 psi (72 bar)
4.5” (115 mm)
4” (100 mm)
7 gal/min (25 l/min)
26 gal/min (98 l/min)
1/2” NPT(F)
1 1/2” NPT(F)
3/4” NPT(F)
Cast Iron, Hard Chromed Steel, Steel, Polyurethane Buna-N™ and Zinc
80 dB
SB 1135
LION™ 450 -10:1 Pump
High pressure pump for oil systems where medium volume dispensing using simultaneous dispense points is required. High pressure pump is recommended for long pumping distances and/or cold weather applications
Part No.:
1430-003 Lion™ 450 10:1 stub pump
1430-004 Lion™ 450 10:1 drum pump
1430-004 Lion™ 450 10:1 drum pump
Markets Served:
Heavy duty truck/fleet, Railroad and mass transit vehicle maintenance, In-plant high volume transfer, Marine, Mining vehicle maintenance, Large automotive dealerships
Technical Data
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(2) Maximum noise level measured at 3’ (1 m) from the pump, 100 psi (7 bar) air pressure and free delivery.
(3) Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor.
NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage lubrication system components. Use pressure relief valve kit included with this pump.
Warning! Do not use any Lion™ 450/600 series products with flammable fluids.
Verify fluid compatibility with MSDS sheets.
Contact Balcrank for specific system design performance and technical data.
30 to 180 psi (2 to 12.4 bar)
19
30 CFM (850 Nl/min)
1,700 psi (120 bar)
4.5” (115 mm)
4” (100 mm)
4 gal/min (15 l/min)
18 gal/min (68 l/min)
1/2” NPT(F)
1 1/2” NPT(F)
3/4” NPT(F)
Cast iron, Hard Chromed Steel, Steel, Polyurethane, Buna-N™, and Zinc
80 dB
SB 1136
LION™ 600 – 6:1 Pump
Medium/high pressure pump for oil systems where high volume dispensing using simultaneous dispense points is required. This pump operates at slow cycle rates for high volume applications. Medium/high pressure pump is recommended for longer pumping distances.
Part No.:
1430-005 Lion™ 600 6:1 stub pump
Markets Served:
Heavy duty truck/fleet, Railroad and mass transit vehicle maintenance, In-plant high volume transfer, Marine, Mining vehicle maintenance, Large automotive dealerships
Technical Data
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(2) Maximum noise level measured at 3’ (1 m) from the pump, 100 psi (7 bar) air pressure and free delivery.
(3) Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor.
NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage lubrication system components. Use pressure relief valve kit included with this pump.
Warning! Do not use any Lion™ 450/600 series products with flammable fluids.
Verify fluid compatibility with MSDS sheets.
Contact Balcrank for specific system design performance and technical data.
30 to 175 psi (2 to 12 bar)
6
39 CFM (1,100 Nl/min)
1,020 psi (72 bar)
6” (150 mm)
4” (100 mm)
9 gal/min (35 l/min)
26 gal/min (100 l/min)
1/2” NPT(F)
1 1/2” NPT(F)
3/4” NPT(F)
Cast Iron, Aluminum, Nickel, Steel, Polyurethane, Buna-N™, and Zinc
80 dB
SB 1137
LION™ 600 – 12:1 Pump
High pressure pump and high-volume, can be used with simultaneous dispense points. This pump operates at slow cycle rates for large shops requiring long pumping distances and applications when cold weather or low air pressure could limit pump performance.
Part No.:
1430-006 Lion™ 600 12:1 stub pump
Markets Served:
Heavy duty truck/fleet, Railroad and mass transit vehicle maintenance, In-plant high volume transfer, Marine, Mining vehicle maintenance, Large automotive dealerships
Technical Data
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(2) Maximum noise level measured at 3’ (1 m) from the pump, 100 psi (7 bar) air pressure and free delivery.
(3) Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor.
NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage lubrication system components. Use pressure relief valve kit included with this pump.
Warning! Do not use any Lion™ 450/600 series products with flammable fluids.
Verify fluid compatibility with MSDS sheets.
Contact Balcrank for specific system design performance and technical data.
30 to 180 psi (2 to 12.4 bar)
11
41 CFM (1,150 Nl/min)
2,040 psi (144 bar)
6” (150 mm)
4” (100 mm)
5 gal/min (20 l/min)
17 gal/min (65 l/min)
1/2” NPT(F)
1 1/2” NPT(F)
3/4” NPT(F)
Cast Iron, Hard Chromed Steel, Steel, Polyurethane, and Buna-N™
80 dB
SB 1138